Peel and Stick Wallpaper Australia: The Complete Guide
Peel and stick wallpaper is self-adhesive wallpaper you apply straight to the wall: no paste, no glue and no professional installer. At Pickawall we've been printing it to size in Melbourne since 2012. This guide covers how it works, which walls it suits, what it costs and how to install and remove it.
What is peel and stick wallpaper?
Peel and stick (also called self-adhesive or removable) wallpaper has the adhesive already on the back. You peel away the backing and press each panel onto the wall. Because there's no paste, there's no soaking, no mess and no waiting for anything to dry.
Pickawall wallpaper is a woven polyester fabric with a soft, canvas-like texture rather than a shiny vinyl. Unlike most vinyl wallpapers, it can be peeled off, rolled back onto its backing and reused. It's breathable, which helps stop air bubbles getting trapped, and it's printed with water-based, odourless inks that are BPA- and PVC-free.
Is peel and stick wallpaper good quality?
Quality varies a lot between brands. Things worth checking before you buy:
- Material: fabric wallpapers tend to look more like traditional wallpaper, are easier to smooth out than thin vinyl, and can often be reused.
- Print size: custom-sized wallpaper is printed to your exact wall, so you're not stuck with leftover rolls or pattern breaks.
- Warranty: Pickawall wallpaper has a 2-year warranty covering fading and adhesion (conditions apply) and a stated 5-year lifespan.
Which walls does it work on?
Peel and stick wallpaper needs a smooth, clean, painted surface. It works on most plasterboard walls and non-textured ceilings with non-Teflon paint.
It's not suitable for rendered, brick or concrete walls, or for Teflon, Wash & Wear, suede-effect or satin finish paints. Freshly painted walls should cure for at least 10 days first.
Try the tape test: stick a piece of tape on the wall and pull it off. If it comes away instantly with no grip, the wallpaper won't hold either.
How much does it cost?
Pickawall fabric wallpaper starts from $79 per square metre, with a 1 sqm minimum. Shipping is a flat $30, or free on orders over $800. For example, a 3m wide by 2.4m high feature wall is 7.2 sqm, so from about $569 plus shipping. See our wallpaper cost guide for more examples.
How do you install it?
- Clean the wall and make sure it's dry and dust-free.
- Start with panel 1 at the top left. Peel back a little of the backing and line the panel up with the top of the wall.
- Smooth it down from the centre outwards as you peel the backing away.
- Overlap the next panel by 10mm using the indicator marks at the top, centre and bottom.
- Trim the small bleed at the bottom and right-hand edge with a sharp blade.
Every order includes an instruction sheet, and there's an installation video too. If a bubble appears, smooth it out by hand or lift and resettle the panel.
Can you remove it?
Yes. Pickawall wallpaper can be removed and reapplied and leaves no residue on suitable smooth surfaces. If you want to move it to a new home, roll it back onto its original backing and reinstall it soon, as adhesion can weaken if it's left off the wall.
How long does it take to arrive?
Most orders are printed and shipped within 7–10 business days. Express printing (about 5 days) is available for an extra $100. Melbourne customers can collect from our office.
Ready to start?
Browse our wallpaper, order a sample pack or read our guides on how to measure and wallpaper for renters.
