Choose your design
Browse millions of images in our library or upload your own photo. Free designs, no subscription.
Open the gallery
Custom Wallpaper, Made Simple
How It Works
From browsing our library of millions of designs to peeling back the last panel — here's everything you need to bring your walls to life with Pickawall.
Five simple steps
From idea to installed wallpaper
Choose a design, customise it for your wall, place your order — and we'll print and ship a peel-and-stick mural ready to install at home.
Customise & preview
Enter your wall dimensions in centimetres, crop and scale, then preview the design on a real-room mockup.
Try the design studioPlace your order
Order online in minutes. Free shipping Australia-wide, with a free sample pack option if you'd like to feel the fabric first.
We print & ship
Printed in Australia on our exclusive self-adhesive fabric using odourless, toxin-free inks — then cut into labelled panels and dispatched.
Install at home
Follow our step-by-step guide. The fabric is repositionable, removable and reusable — so you can take your time getting it right.
Jump to install guideAbout Pickawall
Australia's No.1 custom wall wallpaper
Launched in 2012, Pickawall has been the leader in large-format printing in Australia for more than a decade. Our interactive website lets you fully customise any photo or design to suit your décor and space — opening up a whole world of possibilities where you are the artist and designer, and your blank wall is the canvas.
We print our murals using the latest in safe ink technology — odourless and free of toxins for the safety of your family and the environment. Our exclusive self-adhesive fabric is opaque, breathable and easy to put up, easy to take down, reposition and reuse without damaging your walls.
Want to feel it for yourself? Order a free sample pack and we'll send it out for you to test.
Install guide
How to install your Pickawall
Two people make it easier, but you can do it solo. Allow about 20–30 minutes per panel for your first wall — most of that is taking your time, not actual work. Before you start, give yourself a clear floor, a clean wall and a step ladder.
Read through the eight steps below before you begin so you know what's coming on each panel.
Step-by-step install guide
Eight steps to a perfect wall
Take your time, work top-to-bottom, and remember — the fabric is forgiving. Lift, reposition and re-apply as often as you need.
Preparation
Start with a clean, smooth wall
Inspect for defects. Remove picture hooks and switch plates. Sand back flakey paint, patch, and let it dry.
Hot tipThis should be an enjoyable process. Take your time.
Order matters
Start from the left
Begin with the panel labelled "1" on the bottom tag, then work through the labels in order.
Hot tipPanel 1 sets the base. Allow at least 10 mm of excess at the top — no wall is perfectly square.
Get ready to stick
Peel back the top
Peel the backing roughly 200 mm down from the top of the panel.
Hot tipDon't peel the entire backing. Crease the peel firmly so the first 100 mm sits flat.
Position
Place panel 1
Line up the top edge with your ceiling or cornice. Allow 10–15 mm of excess if the wall isn't square.
Hot tipUse the vertical left edge as your square. Smooth onto the wall with your hands.
Apply
Remove the backing sheet
Slowly peel the backing while smoothing the panel onto the wall. Work down and outwards to push out bubbles.
Hot tipLet the wallpaper fall naturally. Don't stretch it. Reposition if alignment is out.
Smooth out
Wrinkles & bubbles
Gently rub out bubbles or wrinkles. If they don't move, lift the area and re-apply.
Hot tipIf the fabric creases or sticks to itself, don't panic — it pulls apart easily.
Continue
Additional panels
Apply each panel like Panel 1 — vertical drops have a 10 mm overlap. Use the top, centre and bottom indicators to align.
Hot tipFor detailed images, line the top, then peel down to the centre and align from there before working back up.
Finish
Trim & tidy
Use a sharp knife to remove any excess. Aim for around 25 mm of trim at the base and end panel.
Hot tipChange blades often. A fresh blade gives a clean cut without dragging the fabric.
Pro tip
Trimming around switch plates
Six quick steps to wrap around switches and outlets cleanly — then refit the plate when you're done.
Remove the plate
Unscrew and lift off every switch plate before you start. Keep the screws somewhere safe.
Smooth & crease
Firmly smooth the wallpaper into the top edge of the switch so it creases cleanly.
Centre incision
Make a small criss-cross incision in the centre of the switch with a sharp blade.
Extend cuts
Carefully extend each incision out to the inside edge of the switch on every diagonal.
Seal the edge
Firmly seal the wallpaper to the edge of the switch, all the way around the perimeter.
Trim excess
Carefully trim any extra wallpaper around the switch — then screw the plate back on.
Remove & Reuse Guide
Take it down, put it back up
Pickawall's self-adhesive fabric is repositionable and reusable. Whether you're moving house, changing rooms, or just trying a new look — your wallpaper can come with you.
- Lift a corner gently and peel the panel back at a low angle.
- Re-apply the original backing sheet (keep it for storage).
- Roll loosely — never fold — and store somewhere cool and dry.
- Re-hang in any room without losing tack or finish.
Still have questions?
We've got you covered
Browse the most common questions in our FAQ, or get in touch and we'll talk you through it.